Buffers Polishers Discounted: Save On Constant Pressure 6.5 Inch Black Hi-gloss CCS Foam Glazing Pad

Constant Pressure 6.5 Inch Black Hi-gloss CCS Foam Glazing Pad

Read Review
Specs :

Black CCS Glazing/Finessing Pad - This pad has no cutting or cleaning action. It should be used to apply a glaze or a finessing polish.
The blue foam layer on each pad is specially designed to absorb off-axis movements of the polisher to allow the pad to maintain constant pressure on the paint. If you tilt your polisher slightly, the pad adjusts to spread the uneven pressure evenly over the whole pad. The blue layer of each pad is made of instant rebound foam. The blue Constant Pressure foam is behind the work surface foam, so it doesn't affect the cut of the pad.
The Constant Pressure CCS Pads are designed to prolong your polishing time and reduce product waste. On any foam pads, the foam gradually absorbs the product. These cells slow the rate of polish absorption, gradually releasing polish as needed by the operator. CCS pockets reduce surface tension, prevent pad skipping and allow the operator to run the pad flat on the working surface.
The edge of each pad is rounded which allows easy transitions over seams and inclines of vehicles without snagging. If you tilt the polisher, you'll touch the paint with a gentle curved edge as opposed to a blunt edge. The curved edge helps prevent marring on curves and concave panels.
On Constant Pressure Pads, the backing material is 3/8 inch from the edge of the pad. The hook and loop fastener material is coarse and could mar the paint if the user cuts in too close by a vertical panel. For less experienced users, the recessed hook and loop backing is an added safety measure to prevent scratching.